×

Loading...
Ad by
Ad by

@Calgary

night stand一对。Gaboon Ebony + Santos Rosewood

blackscraper(橡皮鱼)
6 coat of poly, 最后wet sand至2000 Grits，蜂蜡抛光，亚光效果。





(#9590293@0)
Last Updated: 2015-8-3
Sign in and Reply Report

Replies, comments and Discussions:

  • 枫下家园 / 美丽家居 / night stand一对。Gaboon Ebony + Santos Rosewood -blackscraper(橡皮鱼); 2015-8-3 {216} (#9590293@0) +1
    6 coat of poly, 最后wet sand至2000 Grits，蜂蜡抛光，亚光效果。





    • 很好很好相当的好，我家正缺一对，回头让老公照着做。 -gracexueli(懒猫); 2015-8-3 (#9590297@0)
    • Woo, 你的选材总是高大上，我还记得你的cocobolo 床了。 -gowindsor(去温莎); 2015-8-3 (#9590316@0)
      • 和已经完工的床配 -blackscraper(橡皮鱼); 2015-8-3 (#9590339@0)
    • 非常精致，漂亮，用了多长时间？ -charlie_king(查理王); 2015-8-4 (#9590549@0)
      • 数周吧。零零碎碎的，没有整段时间可以用在上面。 -blackscraper(橡皮鱼); 2015-8-4 (#9590561@0)
    • 很不错啊。木纹挺漂亮。 -ejbeqhouse(执手，心安，吾家); 2015-8-4 (#9590572@0)
    • 很喜欢亚光的效果。可不可以麻烦你告诉我你用的是哪一种蜂蜡？ -brandnewid(月亮弯); 2015-8-4 (#9590575@0)
      • Clapham's Beeswax -blackscraper(橡皮鱼); 2015-8-4 (#9590603@0)
        • 谢谢。 -brandnewid(月亮弯); 2015-8-4 (#9590955@0)
    • 崇拜 -facenorthface(小北); 2015-8-4 (#9590961@0)
    • 原材料到啥地界去买呀？另外都用到了什么工具？ -thickroad(四环胡同); 2015-8-4 (#9591660@0) +1
      • exotic woods. 工具有tablesaw, router, thickness planer, jointer, drill, impact driver, compressor, nailer, sprayer还有一些手动工具 -blackscraper(橡皮鱼); 2015-8-4 (#9591739@0)
        • "thickness planer, jointer"，牛人。 -pigkiller(早起的虫子); 2015-8-4 (#9592037@0) +1
    • 问一下：你的漆是喷的还是刷的？如果是喷的，很麻烦吗？ -charlie_king(查理王); 2015-8-5 (#9593391@0)
      • hvlp sprayer, much better than brushing on and also way faster. No brushing marks. Just you will consume more paint though. -blackscraper(橡皮鱼); 2015-8-5 (#9593410@0)
        • 或者GEL STAIN, 慢是慢点但容易，无需特别准备工具，效果也很好 -dragon-king(龖龖龖); 2015-8-8 (#9598298@0)
      • Also, I use water based poly. Quite easy to setup and clean. Literally, people can finish 6 coats of solvent based lacquer within one hour. But I prefer water based which is more expensive but healthier. -blackscraper(橡皮鱼); 2015-8-5 (#9593513@0)
      • 我也喷过，只是空压机的指标要高，我喷一会就要等一下，比较麻烦。 想简单的话，可以用刷子刷几遍，买一罐poly清漆喷最后一遍。是装在喷罐里那种，319g一罐，喷个餐桌台面没问题。 -ab6949(游牧民族); 2015-8-6 (#9594348@0)
        • buy hvlp/lvlp sprayer with low rated cfm. Don't use pancake compressor, they are for nailers only. A good compressor will yield good enough results. -blackscraper(橡皮鱼); 2015-8-6 (#9594443@0)
          • 请教你喷的时候，要不要加些thinner？ 我发现喷出来颗粒大了些。 -ab6949(游牧民族); 2015-8-6 (#9595155@0)
            • totally depends。我用的产品不用thinner。照理说hvlp雾化效果很好的。是不是压力不对？hvlp一般就工作在30psi以下。具体要看sprayer -blackscraper(橡皮鱼); 2015-8-6 (#9595216@0)
              • 谢谢，我自己再琢磨试验一下。我是根据sprayer的说明书调整psi的。 -ab6949(游牧民族); 2015-8-6 (#9595343@0)
    • 真精致！不仅是家具，也是工艺品。 -kajia(高山流水); 2015-8-9 (#9598749@0)
    • 好久未上坛子了，看到这么好的night table！请问那么贵重的木料，你的利用率是多少呢？ -bear123(bear123); 2015-8-9 (#9598842@0)

More Topics

  • 前两天回馈贴讲开窗的，要PM的都收到回复了吗？
  • 哪里零售卖driveway interlock?
  • 地下室的内墙有沙化的现象，抹上去还掉渣，是太潮湿嘛？外墙会不会漏水
  • 如果重新装修厨房，空间不是问题，你会选择在Island上装洗碗池还是靠外墙的窗户边上装？为什么
  • 书中自有清整屋：）
    • 枫下论坛主坛 /  枫下家园 /  美丽家居